Scoop coaters are a key tool for proper emulsion application which applies a smooth even coat of emulsion on your printing screen. Our scoop coaters are designed for easy application and cleanup. They are made of durable AL6061T6 aluminum alloy with plastic end cap guides. Dual edges (thick and thin) design permits coating emulsion thicker or thinner on the screen.
Our scoop coaters feature a dual sided coating edge; a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They are easy to hold, sit easily on flat surface between coats, and hold a good amount of emulsion for lengthy coating sessions.
(Be sure to remove the black rubber protective piece from scoop coater before using!)
Available in stocks to shipping on 12 sizes: 4", 5", 6", 8", 10", 12", 14", 16", 18", 19", 20", 26".
Custom sizes are available. Please give us a call for pricing and delivery times.
How to choose the size of Scoop Coater:
|Scoop Coater size||4 in||14 in||16 in||19 in||21 in|
|Meshed Fram Size||8 x 12 in||18 x 20 in||20 x 24 in||23 x 31 in||25 x 36 in|
NOTE: Screens are measured to the outside diameter, so choose a scoop coater 4" smaller than your screen size.
Example: 20" x 24" inch screen will only require a 16 inch scoop coater.
·We can deal with any amount of order. Welcome small quantity.
·All products will be shipped by air or sea.
·Wire transfers are the best form of payment.
Have Questions? Email us at firstname.lastname@example.org or fill in the chart below.